Prof. Shyamal Kumar Pabi

Professor
Department of Metallurgical and Materials Engineering
IIT Kharagpur
West Bengal
India

Publications in Peer-Reviewed Journals

  1. Z. Aparna, M. M. Michael, S. K. Pabi, S. Ghosh, Diversity in thermal conductivity of aqueous Al2O3– and Ag– nanofluids measured by transient hot-wire and laser flash methods (2018), Experimental Thermal and Fluid Science, 94C, pp. 231-245.
  2. Aparna Zagabathuni, Sudipto Ghosh, Shyamal Kumar Pabi, The difference in the thermal conductivity of nanofluids measured by different methods and its rationalization (2016), Beilstein Journal of Nanotechnology, 7, pp.2037-2044.
  3. Z. Aparna, S. Ghosh & S. K. Pabi, Influence of container material on the heat transfer characteristics of nanofluids (2016), Experimental heat transfer, pp. 1-14.
  4. Narra Rajesh, Arup Nandi, S.K.Pabi, Benefits of oxygen enrichment in sponge iron rotary kiln emerging from data driven modeling (2015), Iron making and steel making. (In press).
  5. S.K.Pabi, A. Patra, Swapan Kumar Karak, Synthesis and characterization of nanostructured tungsten-30 atomic % chromium produced by mechanical attrition and hydrogen sintering (2015), Material science forum, 830, pp.59-62.
  6. Suresh Telu, Rahul Mitra and Shyamal Kumar Pabi, Effect of Y2O3 addition on oxidation behavior of W-Cr alloys (2015), Metallurgical and Materials Transactions A, 46A, 5909.
  7. M.M.Ghosh, S.Ghosh, S.K.Pabi, A theoretical study on thermal conductivity of Zn-nanofluid, International Journal of Modern Engineering Research, 1, pp. 400-406.
  8. Jiten Das., G. Appa Rao., S.K.Pabi., M.Sankaranarayana., T.K.Nandy., Oxidation studies in W-Nb Alloys (2014), International Journal of Refractory Metals and Hard Materials, 47, pp 25-37.
  9. Jiten Das., G.Appa Rao., S.K.Pabi., M.Sankaranarayana., T.K.Nandy., Thermo-Mechanical Processing, Microstructure and Tensile Properties of a Tungsten Heavy Alloy (2014), Mat. Sci. Engg. A, 613, pp 49-59.
  10. Ghosh M. M., Ghosh S., Pabi S. K., Effects of Particle Shape and Fluid Temperature on Heat Transfer Characteristics of Nanofluids (2013),  J. Mater. Engg. Performance, 22, pp 1525-1529.
  11. Karthik V., Ghosh S., Pabi S.K., Effects of Bulk Stoichiometry and Surface state of NiAl Nano-dispersoid on the Stability and Heat Transfer Characteristics of Water based Nanofluid (2013), Experimental Thermal and Fluid Science, 48, pp.156-162 .
  12. Suresh Telu., Rahul Mitra., Shyamal Kumar Pabi., High Temperature Oxidation Behavior of W-Cr-Nb Alloys in the Temperature Range of 800-1200 °C (2013), International Journal of Refractory Metals and Hard Materials,38, pp. 47-49. full text
  13. Das N., Mittra J., Murty B.S., Pabi S.K., Kulkarni U.D., Dey G.K., Miedema Model Based Methodology to Predict Amorphous-Forming-Composition Range in Binary and Ternary systems (2013), Journal of Alloys and Compounds, 550, pp. 483-495. full text
  14. Karthik V., S. Sahoo., S. K. Pabi., S. Ghosh., On the Phononic and Electronic Contribution to the Enhanced Thermal Conductivity of Water-based Silver Nanofluids (2013), International Journal of Thermal Sciences , 64, pp. 53-61. full text 
  15. M. M. Ghosh., S. Ghosh., S. K. Pabi, A Parameter for Selection of Nano-Dispersoids in Nanofluids for Thermal Applications, Mater. Sci. Forum, 736 (2013) pp 223-228. full text
  16. Suresh Telu., A. Patra., M. Sankaranarayana., R. Mitra., S. K. Pabi, Microstructure and Cyclic Oxidation Behavior of W-Cr Alloys Prepared by Sintering of Mechanically Alloyed Nanocrystalline Powders (2013), International Journal of Refractory Metals and Hard Materials, 36, pp. 191-203. full text
  17. Suresh Telu., Rahul Mitra., Shyamal Kumar Pabi., Densification and Characterization of W-Cr-Nb Alloys Prepared by Sintering of Nanocrystalline Powders (2012) Powder Metallurgy, in press. full paper
  18. Nayak S.S., Kim D.H., Pabi S.K., Murty B.S., Nanocomposites of Aluminum Alloys by Rapid Solidification Processing (2012) Transactions of the Indian Institute of Metals, (2012), 65 (6) 647-651. full paper
  19. M. M. Ghosh., S. Ghosh., S. K. Pabi., On Synthesis of a Highly Effective and Stable Silver Nanofluid Inspired by Its Multiscale Modeling (2012) Nanoscience and Nanotechnology Letters, 4(8),  pp. 843-848. full paper
  20. Suhrit Mula., Sudipti Ghosh., Shyamal Kumar Pabi., Microstructural Development and Room-Temperature Thermal Stability of Mechanically Alloyed Al87Y10Ni3 Nanostructure (2012), Adv. Sci. Lett., 16,  pp. 362-367. full paper
  21. Suhrit Mula., S. K. Pabi., Carl C Koch., P. Padhi., S. Ghosh., Workability and Mechanical Properties of Ultrasonically Cast Al-Al2O3 Nanocomposites (2012), Mater. Sci. Engg. A, 558, pp. 485-491. full text
  22. Jiten Das., R Sarkar., G Appa Rao., R. Sankaranarayana., T. K. Nandy., S. K. Pabi., Flow Behaviour of a Heat Treated Tungsten Heavy Alloy (2012), Mater. Sci. Engg. A, 553, pp.119– 127. full text
  23. Suresh Telu., V. Karthik., R. Mitra., S. K. Pabi, Effect of 10 at.% Nb addition on Sintering and High Temperature Oxidation of  W0.5Cr0.5 Alloy (2012), Mater. Sci. Forum, 710, pp. 308-313. full text
  24. Laha P., Dahiwale S.S., Banerjee I., Pabi S.K., Kimd D., Barhai P.K., Bhoraskar V.N., Mahapatra S.K. 6 MeV Electron Irradiation Effects on Electrical Properties of Al/TiO2/n-Si MOS capacitors (2011), Nuclear Instruments and Methods in Physics Research, 269 (23), pp. 2740-2744. full paper
  25. Ghosh M.M., Ghosh S., Pabi S.K., On Synthesis and Characterization of Water based Cu9Al4-Nanofluid (2011), Nanoscience and Nanotechnology Letters, 3 (4), pp. 509-512. full paper
  26. Das J., Appa Rao G., Pabi S.K., Sankaranarayana M., Sarma B., Deformation Behaviour of a Newer Tungsten Heavy Alloy (2011), Materials Science and Engineering A, 528 (19-20), pp. 6235-6247. full paper
  27. Nayak S.S., Chang H.J., Kim D.H., Pabi S.K., Murty B.S., Formation of Metastable phases and Nanocomposite Structures in Rapidly Solidified Al-Fe Alloys (2011), Materials Science and Engineering A, 528 (18), pp. 5967-5973.  full paper
  28. Ghosh M.M., Roy S., Pabi S.K., Ghosh S., A Molecular Dynamics-Stochastic Model for Thermal Conductivity of Nanofluids and its Experimental Validation. (2011), Journal of nanoscience and nanotechnology, 11 (3), pp. 2196-2207. full paper
  29. Das J., Appa Rao G., Pabi S.K., Microstructure and Mechanical Properties of Tungsten Heavy Alloys (2010), Materials Science and Engineering A, 527 (29-30), pp. 7841-7847. full paper
  30. Banerjee I., Kumari N., Singh A.K., Kumar M., Laha P., Panda A.B., Pabi S.K., Barhai P.K., Mahapatra S.K., Influence of RF Power on the Electrical and Mechanical Properties of Nano-Structured Carbon Nitride Thin Films Deposited by RF Magnetron Sputtering (2010), Thin Solid Films, 518 (24), pp. 7240-7244. full paper
  31. Rajesh N., Khare M.R., Pabi S.K., Application of ANN Modelling Techniques in Blast Furnace Iron Making (2010), International Journal of Modelling and Simulation, 30 (3), pp. 340-344. 
  32. Mula S., Mondal K., Ghosh S., Pabi S.K., Structure and Mechanical Properties of Al-Ni-Ti Amorphous Powder Consolidated by Pressure-less, Pressure-assisted and Spark Plasma Sintering (2010), Materials Science and Engineering A, 527 (16-17), pp. 3757-3763. full paper
  33. Nayak S.S., Wollgarten M., Banhart J., Pabi S.K., Murty B.S., Nanocomposites and an Extremely Hard Nanocrystalline Intermetallic of Al-Fe Alloys Prepared by Mechanical Alloying (2010), Materials Science and Engineering A, 527 (9), pp. 2370-2378. full paper
  34. Nayak S.S., Pabi S.K., Kim D.H., Murty B.S., Microstructure-Hardness Relationship of Al-(L12)Al3Ti Nanocomposites Prepared by Rapid Solidification Processing (2010), Intermetallics, 18 (4), pp. 487-492. full paper
  35. Nayak S.S., Pabi S.K., Murty B.S., Al-(L12)Al3Ti Nanocomposites Prepared by Mechanical Alloying: Synthesis and Mechanical Properties (2010), Journal of Alloys and Compounds, 492 (1-2), pp. 128-133. full paper
  36. Barhai P.K., Kumari N., Banerjee I., Pabi S.K., Mahapatra S.K., Study of the Effect of Plasma Current Density on the Formation of Titanium Nitride and Titanium Oxynitride Thin Films Prepared by Reactive DC Magnetron Sputtering (2010), Vacuum, 84 (7), pp. 896-901. full paper
  37. Rajesh N., Khare M.R., Pabi S.K., Feed Forward Neural Network for Prediction of End Blow Oxygen in LD Converter Steel Making (2010), Materials Research, 13 (1), pp. 15-19. full paper
  38. Rajesh N., Khare M.R., Pabi S.K., Artificial Neural Networks for Blast Furnace, (2010), International Journal Modeling and Simulation, 13, pp. 15-19. 
  39. Paul K.T., Pabi S.K., Chakraborty K.K., Nando G.B., Nanostructured Fly Ash-Styrene Butadiene Rubber Hybrid Nanocomposites (2009) Polymer Composites, 30 (11), pp. 1647-1656. full paper
  40. Mula S., Padhi P., Panigrahi S.C., Pabi S.K., Ghosh S., On Structure and Mechanical Properties of Ultrasonically Cast Al-2%Al2O3 Nanocomposite (2009), Materials Research Bulletin, 44 (5), pp. 1154-1160. full paper
  41. Mula S., Ghosh S., Pabi S.K., On the Formation of Phases by Mechanical Alloying and Their Thermal Stability in Al-Mn-Ce System (2009), Powder Technology, 191 (1-2), pp. 176-181. full paper
  42. Das N., Kulkarni U.D., Pabi S.K., Murty B.S., Dey G.K., Development of a Thermodynamic Criterion to Predict the Alloy Compositions for Amorphous and Nanocrystalline Phase Formation During Mechanical Alloying (2008), Defect and Diffusion Forum, 279, pp. 147-151. full paper
  43. Biswas A., Li L., Chatterjee U.K., Manna I., Pabi, S.K., Dutta Majumdar J., Mechanical and Electrochemical Properties of Laser Surface Nitrided Ti-6Al-4V (2008), Scripta Materialia, 59 (2), pp. 239-242. full paper
  44. Nayak S.S., Murty B.S., Pabi S.K., Structure of Nanocomposites of Al-Fe Alloys Prepared by Mechanical Alloying and Rapid Solidification Processing (2008), Bulletin of Materials Science, 31 (3), pp. 449-454. full paper
  45. Mula S., Ghosh S., Pabi, S.K., Synthesis of an Al-based Al-Cr-Co-Ce Alloy by Mechanical Alloying and its Thermal Stability (2008), Materials Science and Engineering A, 472 (1-2), pp. 208-213. full paper
  46. Jo W., Kim T.-H., Kim D.Y., Pabi S.K., Effects of Grain Size on the Dielectric Properties of Pb (Mg1/3 Nb2/3) O3 -30 mol % PbTiO3 ceramics (2007), Journal of Applied Physics, 102 (7), art. no. 074116, . full paper
  47. Malewar R., Kumar K.S., Murty B.S., Sarma B., Pabi S.K., On Sinterability of Nanostructured W Produced by High-Energy Ball Milling (2007), Journal of Materials Research, 22 (5), pp. 1200-1206. full paper
  48. Joardar J., Pabi S.K., Murty B.S., Milling Criteria for the Synthesis of Nanocrystalline NiAl by Mechanical Alloying (2007), Journal of Alloys and Compounds, 429 (1-2), pp. 204-210. full paper
  49. Reddy B.S.B., Das K., Pabi S.K., Das S., Mechanical-Thermal Synthesis of Al-Ce/Al2O3 Nanocomposite Powders (2007), Materials Science and Engineering A, 445-446, pp. 341-346. 
  50. Bhatt J., Pabi S.K., Murty B.S., Nanoindentation Studies on Amorphous, Nanoquasicrystalline and Nanocrystalline Zr80Pt20 and Zr75Pd25 Alloys (2007), Journal of Nanoscience and Nanotechnology, 7 (2), pp. 658-662. 
  51. Bhagat A.N., Pabi S.K., Ranganathan S., Mohanty O.N., Study on Copper Precipitation during Continuous Heating and Cooling of HSLA Steels using Electrical Resistivity (2007), Materials Science and Technology, 23 (2), pp. 158-164. full paper
  52. Nayak S.S., Pabi S.K., Murty B.S., High strength nanocrystalline L12-Al3(Ti,Zr) Intermetallic Synthesized by Mechanical Alloying (2007), Intermetallics, 15 (1), pp. 26-33. full paper
  53. Nayak S.S., Kim D.H., Pabi S.K., Murty B.S., Aluminium-based Nanocomposites by Non-Equilibrium Processing Routes (2006), Transactions of the Indian Institute of Metals, 59 (2), pp. 193-198. 
  54. Dey P.K., Gupta M.D., Pabi S.K., Characteristics of Mechanically Alloyed Nanostructured Ni-Al Catalysts in H2O2 Decomposition (2005), Transactions of the Indian Institute of Metals, 58 (6), pp. 1037-1044. 
  55. Das N., Dey G.K., Murty B.S., Pabi S.K., On Amorphization and Nanocomposite Formation in Al-Ni-Ti system by Mechanical Alloying (2005), Pramana - Journal of Physics, 65 (5), pp. 831-840. full paper
  56. Scopus Joardar J., Pabi S.K., Murty B.S., Estimation of Entrapped Powder Temperature during Mechanical Alloying (2004), Scripta Materialia, 50 (9), pp. 1199-1202. full paper
  57. Bhagat A.N., Pabi S.K., Ranganathan S., Mohanty O.N., Aging Behaviour in Copper Bearing High Strength Low Alloy Steels (2004), ISIJ International, 44 (1), pp. 115-122.full paper
  58. Murty B.S., Datta M.K., Pabi S.K., Structure and Thermal Stability of Nanocrystalline Materials (2003), Sadhana - Academy Proceedings in Engineering Sciences, 28 (1-2), pp. 23-45. full paper
  59. Nandi P., Chattopadhyay P.P., Pabi S.K., Manna I., Solid State Synthesis of Al-based Amorphous and Nanocrystalline Al-Cu-Nb Alloys (2003), Materials Science and Engineering A, 359 (1-2), pp. 11-17. full paper
  60. Chattopadhyay P.P., Pabi S.K., Fecht H.J., Manna I., Phase Evolution in Binary Al-Cu (20-70 atomic % Al) and Ternary Al65Cu20TM15 Alloys by Mechanical Alloying (2002), Journal of the Institution of Engineers, Part MM: Metallurgy and Material Science Division, 83 (OCT.), pp. 35-41. 
  61. Joardar J., Pabi S.K., Fecht H.J., Murty B.S., Stability of Nanocrystalline Disordered NiAl Synthesized by Mechanical Alloying (2002), Philosophical Magazine Letters, 82 (9), pp. 469-475. full paper
  62. Datta M.K., Pabi S.K., Murty B.S., Thermal Stability of Nanocrystalline FCC and HCP Ni(Si) Synthesized by Mechanical Alloying of Ni90Si10 (2002), Philosophical Magazine Letters, 81 (2), pp. 77-84. full paper
  63. Manna I., Pabi S.K., Gust W., Discontinuous Reactions in Solids (2001), International Materials Reviews, 46 (2), pp. 53-91. full paper
  64. Chattopadhyay P.P., Gannabattula R.N.R., Pabi S.K., Manna I., Development of Amorphous Al65Cu35-xTix Alloys by Mechanical Alloying (2001), Scripta Materialia, 45 (10), pp. 1191-1196. full paper
  65. Nandi P., Chattopadhyay P.P., Pabi S.K., Manna I., Development of Amorphous and Nano-aluminides Dispersed Al-matrix Composites by Mechanical Alloying (2001), Mater. Phys. Mech., 4, pp. 116-120. full paper
  66. Chattopadhyay P.P., Nambissan P.M.G., Pabi S.K., Manna I., Polymorphic Transformation and ;Lattice Expansion in Nanocrystalline Niobium Revealed by Positron Annihilation at Grain Boundaries (2001), Applied Surface Science, 182 (3-4), pp. 308-312. full paper
  67. Chattopadhyay P.P., Pabi S.K., Manna, I., A Metastable Allotropic Transformation in Nb Induced by Planetary Ball Milling (2001), Materials Science and Engineering A, 304-306 (1-2), pp. 424-428. full paper
  68. Manna I., Chattopadhyay P.P., Chatterjee B., Pabi, S.K., Codeposition of Nanocrystalline Aluminides on a Copper Substrate (2001), Journal of Materials Science, 36 (6), pp. 1419-1424. full paper
  69. Chattopadhyay P.P., Nambissan P.M.G., Pabi S.K., Manna I., Polymorphic BCC to FCC Transformation of Nanocrystalline Niobium Studied by Positron Annihilation (2001), Physical Review B - Condensed Matter and Materials Physics, 63 (5), art. no. 054107, pp. 541071-541077. full paper
  70. Chattopadhyay P.P., Pabi S.K., Manna I., On the Enhancement of Diffusion Kinetics in Nanocrystalline Materials (2001), Materials Chemistry and Physics, 68 (1-3), pp. 80-84. full paper
  71. Chattopadhyay P.P., Manna I., Talapatra S., Pabi S.K. Mathematical Analysis of Milling Mechanics in a Planetary Ball Mill (2001), Materials Chemistry and Physics, 68 (1-3), pp. 85-94. full paper
  72. Chattopadhyay P.P., Pabi S.K., Manna I., Tomota Y., On the Inverse Hall-Petch relationship in Nanocrystalline Materials (2000), Zeitschrift fuer Metallkunde / Materials Research and Advanced Techniques, 91 (12), pp. 1049-1051. 
  73. Das A., Manna I., Pabi S.K., Geometrically Generalized Model of Isothermal Peritectic Transformation (2000), Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 91 (11), pp. 942-949. 
  74. Datta M.K., Pabi S.K., Murty B.S., Face-Centered-Cubic to Hexagonal-Close-Packed Transformation in Nanocrystalline Ni(Si) by Mechanical Alloying (2000), Journal of Materials Research, 15 (7), pp. 1429-1432. full paper
  75. Datta M.K., Pabi S.K., Murty B.S., Phase Fields of Nickel Silicides Obtained by Mechanical Alloying in the Nanocrystalline State (2000), Journal of Applied Physics, 87 (12), pp. 8393-8400. full paper
  76. Datta M.K., Pabi S.K., Murty B.S., Thermal Stability of Nanocrystalline Ni Silicides Synthesized by Mechanical Alloying (2000), Materials Science and Engineering A, 284 (1-2), pp. 219-225. full paper
  77. Pabi S. K., Joardar J., Murthy B. S., Mechanisms of Kinetics if Alloying and Nanostructure Formation by Mechanical Alloying (2000), PINSA-A (Physical Science), 67, pp. 1-30. 
  78. Bhattacharyya S.K., Sharma R.P., Pabi S.K., Effects of Pre-Annealing Temperature on 222Rn Permeability in Au (1999), Defect and Diffusion Forum, (165-166), pp. 53-62. 
  79. Das A., Gust W., Pabi S.K., Manna I., Metastable and Equilibrium Decomposition of the Eutectoid β-phase in the Cu-In System (1999), Materials Science Forum, 294-296, pp. 485-488. 
  80. Das A., Manna I., Pabi S.K. A Numerical Model of Peritectoid Transformation (1999), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 30 (10), pp. 2563-2573. full paper
  81. Chatterjee P.P., Pabi S.K., Manna I. An Allotropic Transformation Induced by Mechanical Alloying (1999), Journal of Applied Physics, 86 (10), pp. 5912-5914. full paper
  82. Bhattacharyya, S.K., Pabi, S.K. Effects of thermal cycles on 222Rn permeability in Au (1999), Journal of Nuclear Materials, 275 (2), pp. 206-210. full paper
  83. Das, D., Chatterjee, P.P., Manna, I., Pabi, S.K. Measure of enhanced diffusion kinetics in mechanical alloying of Cu-18 at.% Al by planetary ball milling (1999), Scripta Materialia, 41 (8), pp. 861-866. full paper
  84. Pabi, S.K., Manna, I., Murty, B.S. Alloying behaviour in nanocrystalline materials during mechanical alloying (1999), Bulletin of Materials Science, 22 (3), pp. 321-327. full paper
  85. Das, A., Manna, I., Pabi, S.K. Numerical model of peritectic transformation (1999), Acta Materialia, 47 (4), pp. 1379-1388. full paper
  86. Manna, I., Chatterjee, P.P., Srinivas Rao, V., Pabi, S.K. Codeposition of nanocrystalline NbAl3 particles on Cu (1999), Scripta Materialia, 40 (4), pp. 409-415. full paper
  87. Das, A., Pabi, S.K., Manna, I., Gust, W. Kinetics of the eutectoid transformation in the Cu-In system (1999), Journal of Materials Science, 34 (8), pp. 1815-1821. full paper
  88. Manna, I., Jha, J.N., Pabi, S.K. Kinetics of discontinuous precipitation and type I discontinuous coarsening in Zn-4 at % Ag alloy (1999), Journal of Materials Science, 34 (4), pp. 773-781. full paper
  89. Pabi, S.K., Das, D., Mahapatra, T.K., Manna, I. Mathematical modelling of the mechanical alloying kinetics (1998), Acta Materialia, 46 (10), pp. 3501-3510. full paper
  90. Das, A., Manna, I., Pabi, S.K. An analytical solution of peritectic transformation kinetics (1998), Transactions of the Indian Institute of Metals, 51 (2-3), pp. 165-174. 
  91. Manna, I., Das, A., Pabi, S.K., Gust, W. Interphase boundary chemical diffusion data of Cu-20.1 at.% in through kinetic analysis of eutectoid transformation (1997), Defect and Diffusion Forum, 143-147, pp. 1551-1556. 
  92. Pabi, S.K., Joardar, J., Manna, I., Murty, B.S. Nanocrystralline phases in Cu-Ni, Cu-Zn and Ni-Al systems by mechanical alloying (1997), Nanostructured Materials, 9 (1-8), pp. 149-152. full paper
  93. Pabi, S.K., Das, A. Prospects of mechanical alloying in nanostructured composite production (1997), Metals Materials and Processes, 9 (3), pp. 229-242.
  94. Pabi, S.K., Bhattacharyya, S.K. Effects of thermal cycles on 222Rn permeability in Pb (1997), Journal of Nuclear Materials, 246 (2-3), pp. 252-255. full paper
  95. Bhattacharyya, S.K., Pabi, S.K. Highly sensitive measurements of 222Rn permeability in Au (1997), Journal of Nuclear Materials, 245 (1), pp. 44-51. full paper
  96. Das, A., Manna, I., Pabi, S.K. An analytical model for peritectic transformation with experimental verification (1997), Scripta Materialia, 36 (8), pp. 867-874. full paper
  97. Murty, B.S., Joardar, J., Pabi, S.K. Effect of non-stoichiometry on the ordering behaviour of nanocrystalline NiAl produced by mechanical alloying (1996), Journal of Materials Science Letters, 15 (24), pp. 2171-2172. full paper
  98. Manna, I., Jha, J.N., Pabi, S.K. Mechanism and kinetics of type II Discontinuous Coarsening in a Zn-4 at%Ag alloy (1996), Journal of Materials Science, 31 (9), pp. 2401-2407. full paper
  99. Bhattacharyya, S.K., Pabi, S.K. Highly sensitive measurements of222Rn permeability in Pb (1996), Defect and Diffusion Forum, 138-139, pp. 63-70.
  100. Pabi, S.K., Joardar, J., Murty, B.S. Formation of nanocrystalline phases in the Cu-Zn system during mechanical alloying (1996), Journal of Materials Science, 31 (12), pp. 3207-3211. full paper
  101. Murty, B.S., Singh, K.H.S., Pabi, S.K. Synthesis of nanocrystalline NiAl over a wide composition range by mechanical alloying (1996), Bulletin of Materials Science, 19 (3), pp. 565-571. full paper
  102. Pabi, S.K., Murty, B.S. Synthesis of nanocrystalline alloys and intermetallics by mechanical alloying (1996), Bulletin of Materials Science, 19 (6), pp. 939-956. full paper
  103. Manna, I., Bala, P.K., Pabi, S.K., Gust, W. Discontinuous precipitation in a Cd-6 at. % Ag alloy (1996), Acta Materialia, 44 (11), pp. 4587-4595. full paper
  104. Pabi, S.K., Murty, B.S. Mechanism of mechanical alloying in Ni-Al and Cu-Zn systems (1996), Materials Science and Engineering A, 214 (1-2), pp. 146-152. full paper
  105. Murty, B.S., Joardar, J., Pabi, S.K. Influence of Fe and Cr on the disordering behavior of mechanically alloyed NiAl (1996), Nanostructured Materials, 7 (6), pp. 691-697. full paper
  106. Manna, I., Jha, J.N., Pabi, S.K. Kinetics of discontinuous precipitation in a Zn-2.5 at % Cu alloy (1995), Journal of Materials Science, 30 (6), pp. 1449-1454. 
  107. Manna, I., P. K. Bala, Pabi, S.K. Estimation of Arrhenius paramrtrs of graim boundary chemical diffusion of Sn in a Pb-9.87 at. % Sn alloy through kinetics of discontinous precipitation, (1995), Z. Metallkde, 86, pp. 401-404. 
  108. Manna, I., Abraham, S., Reddy, G., Bose, D.N., Ghosh, T.B., Pabi, S.K. Laser surface alloying of aluminum on copper substrate (1994), Scripta Metallurgica et Materiala, 31 (6), pp. 713-718. full paper
  109. Manna, Indranil, Swaminathan, Jayaraman, Pabi, Shyamal K. On the composition profile in the matrix phase within a discontinuous precipitation colony (1994), Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 85 (1), pp. 50-51. full paper
  110. Manna, I., Pabi, S.K. Effect of surface strain on discontinuous precipitation kinetics in a Cu-7.7 at % Ag alloy (1994), Journal of Materials Science Letters, 13 (1), pp. 62-64. full paper
  111. Manna, I., Jha, J.N., Pabi, S.K. Kinetics of discontinuous precipitation in a Zn-2 at. % Ag alloy (1993), Scripta Metallurgica et Materiala, 29 (6), pp. 817-822. full paper
  112. P.S.Basak, A.S.Gupta and S.K.Pabi Solute distribution during steady-state cellular growth (1991), Metallurgical transactions A, 22A, 3035.
  113. Manna, I., Pabi, S.K., Gust, W. Discontinous precipitation in a Cu-12 at.% in alloy (1991), Acta Metallurgica Et Materialia, 39 (7), pp. 1489-1496. full paper
  114. Manna, I., Pabi, S.K. Effect of ternary addition on discontinuous precipitation kinetics in Pb-Sn alloys (1991), Physica Status Solidi (A) Applied Research, 123 (2), pp. 393-399. full paper 
  115. Manna, I., Pabi, S.K., Gust, W. Initiation sites for discontinuous precipitation in some Cu-base alloys (1991), Journal of Materials Science, 26 (18), pp. 4888-4892. full paper
  116. Manna, I and Pabi, S. K., Effect of Repeated Freezing on Transformation Kinetics in a Pb-Sn Alloy, Trans. Ind. Inst. Met.., 43 (1990), 376-380. 
  117. Manna, I., Pabi, S.K. A study of the nucleation characteristics of discontinuous precipitation in a pro-eutectic Cu-Ag alloy (1990), Journal of Materials Science Letters, 9 (10), pp. 1226-1228. full paper
  118. Asthana, R., Pabi, S.K. An approximate solution for the finite-extent moving-boundary diffusion-controlled dissolution of spheres (1990), Materials Science and Engineering A, 128 (2), pp. 253-258. full paper
  119. Manna, I., Pabi, S.K. Resistometric determination of the metastable solvus for discontinuous precipitation (1990), Journal of Materials Science Letters, 9 (7), pp. 854-856. full paper
  120. Basak, P.S., Pabi, S.K. Effects of convection on unidirectional solidification of A PbSn alloy (1990), Materials Letters, 9 (5-6), pp. 211-214. full paper
  121. Krauss, W., Pabi, S.K., Gleiter, H. On the mechanism of martensite nucleation (1989), Acta Metallurgica, 37 (1), pp. 25-30. Cited 10 times. full paper 
  122. Manna, I., Pabi, S.K. A pre-precipitation phenomenon in the Pb-Sn alloy (1988), Journal of Materials Science Letters, 7 (12), pp. 1299-1300. full paper
  123. Pabi, S.K., Hahn, H. A highly sensitive method for measurement of 222Rn permeability in metals (1988), Journal of Physics and Chemistry of Solids, 49 (9), pp. 1035-1042. full paper
  124. Manna, I., Pabi, S.K. . Resistometric Study of Migrating Boundary Characteristics in Pb-Sn Alloys (1988), Physica Status Solidi (A) Applied Research, 108 (1), pp. k19-k23. full paper 
  125. Pabi, S.K. On the Variation of Interface Composition Around a Dissolving Precipitate (1983), Physica Status Solidi (A) Applied Research, 80 (1), pp. 305-316. full paper
  126. Pabi, S.K. On the dissolution kinetics of silicon in an aluminium-rich matrix (1980) Materials Science and Engineering, 43 (2), pp. 151-158. full paper 
  127. Pabi, S.K. Computer Simulation of the Two-Phase Diffusion-Controlled Dissolution in the Planar Finite Multilayer Couples (1979), Phys Status Solidi (A) Appl Res, 51 (1), pp. 281-289. 
  128. Pabi, S.K. Some Factors Influencing Double-Aging of Ternary Aluminum Alloys.(1976), Indian J Technol, 14 (7), pp. 345-348. 
  129. Pabi, S.K. Resistometric Study of Zone Formation in Al-Cu-Mg Alloys (1976), NML Tech J, 18 (1), pp. 10-13. 
  130. Pabi. S.K., Mechanism of Dissolution of Si in Al, Physica Status Solidi (a), 50 (1978) k9-k12. 
  131. Pabi, S.K., An Analysis for One-Phase Diffusion Controlled Dissolution in Planner Composite, Acta Metall., 27 (1979) 1693-1700. full paper 
  132. Pabi, S.K., Mallik, A.K. A resistometric study of excess vacancies in AlCuMg alloys (1975) Materials Science and Engineering, 21 (C), pp. 149-153. full paper


Patents

  1. Development of Nano-intermetallic Dispersed Al-matrix Composites from the Al-Cu-X Ternary Metastable Precursors, Indian Patent, 2005., I.Manna, P.P.Chattopadhyay and S.K.Pabi.
  2. Stable Dispersion of Surface Capped Silver Nanopowder in Hydrophilic Medium with enhanced Thermal Conductivity, Indian Patent, Official filing number of 1068/KOL/2009, M.M.Ghosh, S.K.Pabi and S.Ghosh.