Prof. Shyamal Kumar Pabi

Professor
Department of Metallurgical and Materials Engineering
IIT Kharagpur
West Bengal
India

Before 2006

  1. Nayak S.S., Kim D.H., Pabi S.K., Murty B.S., Aluminium-based Nanocomposites by Non-Equilibrium Processing Routes (2006), Transactions of the Indian Institute of Metals, 59 (2), pp. 193-198. 
  2. Dey P.K., Gupta M.D., Pabi S.K., Characteristics of Mechanically Alloyed Nanostructured Ni-Al Catalysts in H2O2 Decomposition (2005), Transactions of the Indian Institute of Metals, 58 (6), pp. 1037-1044. 
  3. Das N., Dey G.K., Murty B.S., Pabi S.K., On Amorphization and Nanocomposite Formation in Al-Ni-Ti system by Mechanical Alloying (2005), Pramana - Journal of Physics, 65 (5), pp. 831-840. full paper
  4. Scopus Joardar J., Pabi S.K., Murty B.S., Estimation of Entrapped Powder Temperature during Mechanical Alloying (2004), Scripta Materialia, 50 (9), pp. 1199-1202. full paper
  5. Bhagat A.N., Pabi S.K., Ranganathan S., Mohanty O.N., Aging Behaviour in Copper Bearing High Strength Low Alloy Steels (2004), ISIJ International, 44 (1), pp. 115-122.full paper
  6. Murty B.S., Datta M.K., Pabi S.K., Structure and Thermal Stability of Nanocrystalline Materials (2003), Sadhana - Academy Proceedings in Engineering Sciences, 28 (1-2), pp. 23-45. full paper
  7. Nandi P., Chattopadhyay P.P., Pabi S.K., Manna I., Solid State Synthesis of Al-based Amorphous and Nanocrystalline Al-Cu-Nb Alloys (2003), Materials Science and Engineering A, 359 (1-2), pp. 11-17. full paper
  8. Chattopadhyay P.P., Pabi S.K., Fecht H.J., Manna I., Phase Evolution in Binary Al-Cu (20-70 atomic % Al) and Ternary Al65Cu20TM15 Alloys by Mechanical Alloying (2002), Journal of the Institution of Engineers, Part MM: Metallurgy and Material Science Division, 83 (OCT.), pp. 35-41. 
  9. Joardar J., Pabi S.K., Fecht H.J., Murty B.S., Stability of Nanocrystalline Disordered NiAl Synthesized by Mechanical Alloying (2002), Philosophical Magazine Letters, 82 (9), pp. 469-475. full paper
  10. Datta M.K., Pabi S.K., Murty B.S., Thermal Stability of Nanocrystalline FCC and HCP Ni(Si) Synthesized by Mechanical Alloying of Ni90Si10 (2002), Philosophical Magazine Letters, 81 (2), pp. 77-84. full paper
  11. Manna I., Pabi S.K., Gust W., Discontinuous Reactions in Solids (2001), International Materials Reviews, 46 (2), pp. 53-91. full paper
  12. Chattopadhyay P.P., Gannabattula R.N.R., Pabi S.K., Manna I., Development of Amorphous Al65Cu35-xTix Alloys by Mechanical Alloying (2001), Scripta Materialia, 45 (10), pp. 1191-1196. full paper
  13. Nandi P., Chattopadhyay P.P., Pabi S.K., Manna I., Development of Amorphous and Nano-aluminides Dispersed Al-matrix Composites by Mechanical Alloying (2001), Mater. Phys. Mech., 4, pp. 116-120. full paper
  14. Chattopadhyay P.P., Nambissan P.M.G., Pabi S.K., Manna I., Polymorphic Transformation and ;Lattice Expansion in Nanocrystalline Niobium Revealed by Positron Annihilation at Grain Boundaries (2001), Applied Surface Science, 182 (3-4), pp. 308-312. full paper
  15. Chattopadhyay P.P., Pabi S.K., Manna, I., A Metastable Allotropic Transformation in Nb Induced by Planetary Ball Milling (2001), Materials Science and Engineering A, 304-306 (1-2), pp. 424-428. full paper
  16. Manna I., Chattopadhyay P.P., Chatterjee B., Pabi, S.K., Codeposition of Nanocrystalline Aluminides on a Copper Substrate (2001), Journal of Materials Science, 36 (6), pp. 1419-1424. full paper
  17. Chattopadhyay P.P., Nambissan P.M.G., Pabi S.K., Manna I., Polymorphic BCC to FCC Transformation of Nanocrystalline Niobium Studied by Positron Annihilation (2001), Physical Review B - Condensed Matter and Materials Physics, 63 (5), art. no. 054107, pp. 541071-541077. full paper
  18. Chattopadhyay P.P., Pabi S.K., Manna I., On the Enhancement of Diffusion Kinetics in Nanocrystalline Materials (2001), Materials Chemistry and Physics, 68 (1-3), pp. 80-84. full paper
  19. Chattopadhyay P.P., Manna I., Talapatra S., Pabi S.K. Mathematical Analysis of Milling Mechanics in a Planetary Ball Mill (2001), Materials Chemistry and Physics, 68 (1-3), pp. 85-94. full paper
  20. Chattopadhyay P.P., Pabi S.K., Manna I., Tomota Y., On the Inverse Hall-Petch relationship in Nanocrystalline Materials (2000), Zeitschrift fuer Metallkunde / Materials Research and Advanced Techniques, 91 (12), pp. 1049-1051. 
  21. Das A., Manna I., Pabi S.K., Geometrically Generalized Model of Isothermal Peritectic Transformation (2000), Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 91 (11), pp. 942-949. 
  22. Datta M.K., Pabi S.K., Murty B.S., Face-Centered-Cubic to Hexagonal-Close-Packed Transformation in Nanocrystalline Ni(Si) by Mechanical Alloying (2000), Journal of Materials Research, 15 (7), pp. 1429-1432. full paper
  23. Datta M.K., Pabi S.K., Murty B.S., Phase Fields of Nickel Silicides Obtained by Mechanical Alloying in the Nanocrystalline State (2000), Journal of Applied Physics, 87 (12), pp. 8393-8400. full paper
  24. Datta M.K., Pabi S.K., Murty B.S., Thermal Stability of Nanocrystalline Ni Silicides Synthesized by Mechanical Alloying (2000), Materials Science and Engineering A, 284 (1-2), pp. 219-225. full paper
  25. Pabi S. K., Joardar J., Murthy B. S., Mechanisms of Kinetics if Alloying and Nanostructure Formation by Mechanical Alloying (2000), PINSA-A (Physical Science), 67, pp. 1-30. 
  26. Bhattacharyya S.K., Sharma R.P., Pabi S.K., Effects of Pre-Annealing Temperature on 222Rn Permeability in Au (1999), Defect and Diffusion Forum, (165-166), pp. 53-62. 
  27. Das A., Gust W., Pabi S.K., Manna I., Metastable and Equilibrium Decomposition of the Eutectoid β-phase in the Cu-In System (1999), Materials Science Forum, 294-296, pp. 485-488. 
  28. Das A., Manna I., Pabi S.K. A Numerical Model of Peritectoid Transformation (1999), Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 30 (10), pp. 2563-2573. full paper
  29. Chatterjee P.P., Pabi S.K., Manna I. An Allotropic Transformation Induced by Mechanical Alloying (1999), Journal of Applied Physics, 86 (10), pp. 5912-5914. full paper
  30. Bhattacharyya, S.K., Pabi, S.K. Effects of thermal cycles on 222Rn permeability in Au (1999), Journal of Nuclear Materials, 275 (2), pp. 206-210. full paper
  31. Das, D., Chatterjee, P.P., Manna, I., Pabi, S.K. Measure of enhanced diffusion kinetics in mechanical alloying of Cu-18 at.% Al by planetary ball milling (1999), Scripta Materialia, 41 (8), pp. 861-866. full paper
  32. Pabi, S.K., Manna, I., Murty, B.S. Alloying behaviour in nanocrystalline materials during mechanical alloying (1999), Bulletin of Materials Science, 22 (3), pp. 321-327. full paper
  33. Das, A., Manna, I., Pabi, S.K. Numerical model of peritectic transformation (1999), Acta Materialia, 47 (4), pp. 1379-1388. full paper
  34. Manna, I., Chatterjee, P.P., Srinivas Rao, V., Pabi, S.K. Codeposition of nanocrystalline NbAl3 particles on Cu (1999), Scripta Materialia, 40 (4), pp. 409-415. full paper
  35. Das, A., Pabi, S.K., Manna, I., Gust, W. Kinetics of the eutectoid transformation in the Cu-In system (1999), Journal of Materials Science, 34 (8), pp. 1815-1821. full paper
  36. Manna, I., Jha, J.N., Pabi, S.K. Kinetics of discontinuous precipitation and type I discontinuous coarsening in Zn-4 at % Ag alloy (1999), Journal of Materials Science, 34 (4), pp. 773-781. full paper
  37. Pabi, S.K., Das, D., Mahapatra, T.K., Manna, I. Mathematical modelling of the mechanical alloying kinetics (1998), Acta Materialia, 46 (10), pp. 3501-3510. full paper
  38. Das, A., Manna, I., Pabi, S.K. An analytical solution of peritectic transformation kinetics (1998), Transactions of the Indian Institute of Metals, 51 (2-3), pp. 165-174. 
  39. Manna, I., Das, A., Pabi, S.K., Gust, W. Interphase boundary chemical diffusion data of Cu-20.1 at.% in through kinetic analysis of eutectoid transformation (1997), Defect and Diffusion Forum, 143-147, pp. 1551-1556. 
  40. Pabi, S.K., Joardar, J., Manna, I., Murty, B.S. Nanocrystralline phases in Cu-Ni, Cu-Zn and Ni-Al systems by mechanical alloying (1997), Nanostructured Materials, 9 (1-8), pp. 149-152. full paper
  41. Pabi, S.K., Das, A. Prospects of mechanical alloying in nanostructured composite production (1997), Metals Materials and Processes, 9 (3), pp. 229-242.
  42. Pabi, S.K., Bhattacharyya, S.K. Effects of thermal cycles on 222Rn permeability in Pb (1997), Journal of Nuclear Materials, 246 (2-3), pp. 252-255. full paper
  43. Bhattacharyya, S.K., Pabi, S.K. Highly sensitive measurements of 222Rn permeability in Au (1997), Journal of Nuclear Materials, 245 (1), pp. 44-51. full paper
  44. Das, A., Manna, I., Pabi, S.K. An analytical model for peritectic transformation with experimental verification (1997), Scripta Materialia, 36 (8), pp. 867-874. full paper
  45. Murty, B.S., Joardar, J., Pabi, S.K. Effect of non-stoichiometry on the ordering behaviour of nanocrystalline NiAl produced by mechanical alloying (1996), Journal of Materials Science Letters, 15 (24), pp. 2171-2172. full paper
  46. Manna, I., Jha, J.N., Pabi, S.K. Mechanism and kinetics of type II Discontinuous Coarsening in a Zn-4 at%Ag alloy (1996), Journal of Materials Science, 31 (9), pp. 2401-2407. full paper
  47. Bhattacharyya, S.K., Pabi, S.K. Highly sensitive measurements of222Rn permeability in Pb (1996), Defect and Diffusion Forum, 138-139, pp. 63-70.
  48. Pabi, S.K., Joardar, J., Murty, B.S. Formation of nanocrystalline phases in the Cu-Zn system during mechanical alloying (1996), Journal of Materials Science, 31 (12), pp. 3207-3211. full paper
  49. Murty, B.S., Singh, K.H.S., Pabi, S.K. Synthesis of nanocrystalline NiAl over a wide composition range by mechanical alloying (1996), Bulletin of Materials Science, 19 (3), pp. 565-571. full paper
  50. Pabi, S.K., Murty, B.S. Synthesis of nanocrystalline alloys and intermetallics by mechanical alloying (1996), Bulletin of Materials Science, 19 (6), pp. 939-956. full paper
  51. Manna, I., Bala, P.K., Pabi, S.K., Gust, W. Discontinuous precipitation in a Cd-6 at. % Ag alloy (1996), Acta Materialia, 44 (11), pp. 4587-4595. full paper
  52. Pabi, S.K., Murty, B.S. Mechanism of mechanical alloying in Ni-Al and Cu-Zn systems (1996), Materials Science and Engineering A, 214 (1-2), pp. 146-152. full paper
  53. Murty, B.S., Joardar, J., Pabi, S.K. Influence of Fe and Cr on the disordering behavior of mechanically alloyed NiAl (1996), Nanostructured Materials, 7 (6), pp. 691-697. full paper
  54. Manna, I., Jha, J.N., Pabi, S.K. Kinetics of discontinuous precipitation in a Zn-2.5 at % Cu alloy (1995), Journal of Materials Science, 30 (6), pp. 1449-1454. 
  55. Manna, I., P. K. Bala, Pabi, S.K. Estimation of Arrhenius paramrtrs of graim boundary chemical diffusion of Sn in a Pb-9.87 at. % Sn alloy through kinetics of discontinous precipitation, (1995), Z. Metallkde, 86, pp. 401-404. 
  56. Manna, I., Abraham, S., Reddy, G., Bose, D.N., Ghosh, T.B., Pabi, S.K. Laser surface alloying of aluminum on copper substrate (1994), Scripta Metallurgica et Materiala, 31 (6), pp. 713-718. full paper
  57. Manna, Indranil, Swaminathan, Jayaraman, Pabi, Shyamal K. On the composition profile in the matrix phase within a discontinuous precipitation colony (1994), Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 85 (1), pp. 50-51. full paper
  58. Manna, I., Pabi, S.K. Effect of surface strain on discontinuous precipitation kinetics in a Cu-7.7 at % Ag alloy (1994), Journal of Materials Science Letters, 13 (1), pp. 62-64. full paper
  59. Manna, I., Jha, J.N., Pabi, S.K. Kinetics of discontinuous precipitation in a Zn-2 at. % Ag alloy (1993), Scripta Metallurgica et Materiala, 29 (6), pp. 817-822. full paper
  60. P. S. Basak, A. S. Gupta and S. K. Pabi Solute distrubution during steady state cellular growth (1991), Metallurgical transactions A, 22A, 3035.
  61. Manna, I., Pabi, S.K., Gust, W. Discontinous precipitation in a Cu-12 at.% in alloy (1991), Acta Metallurgica Et Materialia, 39 (7), pp. 1489-1496. full paper
  62. Manna, I., Pabi, S.K. Effect of ternary addition on discontinuous precipitation kinetics in Pb-Sn alloys (1991), Physica Status Solidi (A) Applied Research, 123 (2), pp. 393-399. full paper 
  63. Manna, I., Pabi, S.K., Gust, W. Initiation sites for discontinuous precipitation in some Cu-base alloys (1991), Journal of Materials Science, 26 (18), pp. 4888-4892. full paper
  64. Manna, I and Pabi, S. K., Effect of Repeated Freezing on Transformation Kinetics in a Pb-Sn Alloy, Trans. Ind. Inst. Met.., 43 (1990), 376-380. 
  65. Manna, I., Pabi, S.K. A study of the nucleation characteristics of discontinuous precipitation in a pro-eutectic Cu-Ag alloy (1990), Journal of Materials Science Letters, 9 (10), pp. 1226-1228. full paper
  66. Asthana, R., Pabi, S.K. An approximate solution for the finite-extent moving-boundary diffusion-controlled dissolution of spheres (1990), Materials Science and Engineering A, 128 (2), pp. 253-258. full paper
  67. Manna, I., Pabi, S.K. Resistometric determination of the metastable solvus for discontinuous precipitation (1990), Journal of Materials Science Letters, 9 (7), pp. 854-856. full paper
  68. Basak, P.S., Pabi, S.K. Effects of convection on unidirectional solidification of A PbSn alloy (1990), Materials Letters, 9 (5-6), pp. 211-214. full paper
  69. Krauss, W., Pabi, S.K., Gleiter, H. On the mechanism of martensite nucleation (1989), Acta Metallurgica, 37 (1), pp. 25-30. Cited 10 times. full paper 
  70. Manna, I., Pabi, S.K. A pre-precipitation phenomenon in the Pb-Sn alloy (1988), Journal of Materials Science Letters, 7 (12), pp. 1299-1300. full paper
  71. Pabi, S.K., Hahn, H. A highly sensitive method for measurement of 222Rn permeability in metals (1988), Journal of Physics and Chemistry of Solids, 49 (9), pp. 1035-1042. full paper
  72. Manna, I., Pabi, S.K. . Resistometric Study of Migrating Boundary Characteristics in Pb-Sn Alloys (1988), Physica Status Solidi (A) Applied Research, 108 (1), pp. k19-k23. full paper 
  73. Pabi, S.K. On the Variation of Interface Composition Around a Dissolving Precipitate (1983), Physica Status Solidi (A) Applied Research, 80 (1), pp. 305-316. full paper
  74. Pabi, S.K. On the dissolution kinetics of silicon in an aluminium-rich matrix (1980) Materials Science and Engineering, 43 (2), pp. 151-158. full paper  
  75. Pabi, S.K. Computer Simulation of the Two-Phase Diffusion-Controlled Dissolution in the Planar Finite Multilayer Couples (1979), Phys Status Solidi (A) Appl Res, 51 (1), pp. 281-289. 
  76. Pabi, S.K. Some Factors Influencing Double-Aging of Ternary Aluminum Alloys.(1976), Indian J Technol, 14 (7), pp. 345-348. 
  77. Pabi, S.K. Resistometric Study of Zone Formation in Al-Cu-Mg Alloys (1976), NML Tech J, 18 (1), pp. 10-13. 
  78. Pabi. S.K., Mechanism of Dissolution of Si in Al, Physica Status Solidi (a), 50 (1978) k9-k12. 
  79. Pabi, S.K., An Analysis for One-Phase Diffusion Controlled Dissolution in Planner Composite, Acta Metall., 27 (1979) 1693-1700. full paper 
  80. Pabi, S.K., Mallik, A.K. A resistometric study of excess vacancies in AlCuMg alloys (1975) Materials Science and Engineering, 21 (C), pp. 149-153. full paper